Бесплатный фрагмент - Scientific and practical technomagic

Introduction

In the economic, technical and, in general, in the scientific community, the question of the ways of developing our civilization is now being rather vigorously discussed. On various discussion platforms, this question sounds something like this: “What technological order awaits our civilization? The industrial order is over. Now the post-industrial one is coming and developing, but it, it seems, also, in all scenarios, will not last long.”

And there are already quite a few futurological pictures of the development of our society. This is a “digital concentration camp” and a rating system like in China, and the economy of consumption according to Schwab, and the worlds of dominant corporations. There are also worlds in which the future is like the past — all on horseback, on flying dragons, with bows and swords — such, like, “battle of thrones”. Sheer horror!

I have my own version of the development and formation of the technological way of earth civilization — this is a techno-magical and techno-spiritual way of development.

This way of life arises as a result of the natural development of science and technology, of course, if this process is not interfered with. If you don’t interfere, then such a branch of science as “Etherdynamics” arises and develops, which, based on knowledge about the Ether, inevitably leads to the emergence and development of etherodynamic technologies, to the development of new views and understandings of the structure of the planetary system, star system, galaxy, universe.

And then all this, unambiguously, leads to an understanding of the existence and role of the Creativity — to the existence of the Creator, to the existence of his creative energies of various directions and purposes. To understanding the Place of these Energies in the creative process, about their physical location. And then, without a doubt, people will definitely learn to establish a connection with these Creative Energies, first with the help of technical devices, and then as a final, already without the use of “technological crutches”, but only using the capabilities, abilities and skills of their own organism.

And thus, the ethereal-dynamic, or techno-magic, mode is transformed into the Techno-spiritual mode.

Ether-dynamic, techno-magical, techno-spiritual technologies, these technologies are quite simple. There is nothing particularly difficult there. In any case, at the first, primitive, stage of their development.

But nevertheless, information about these technologies is kept “with seven seals”, and should get to civilization only when this civilization reaches a certain level of development. Like how we are now. We are now well developed. In all senses. We are ready for it.

But there are situations when information enters civilization earlier than it should. And then there is a distortion in development. And this has already happened, and it is with our civilization.

Somewhere, a little over 1000 years ago, our civilization got knowledge that should not have got to it. I think that for some reason, Prometheus passed this knowledge to us. For this he was later punished. And it started…

Without the elementary development of science and technology, people have learned to fly with the help of anti-gravity technologies. People have learned to replicate (copy) any objects in any quantities. People have learned to build magnificent buildings using the creative energies of the Co-Creators. People have learned to live long and not get sick. People have learned to cut megaliths and move them. Yes, we learned a lot.

It would seem — great! The beauty! But you know the little people — their curiosity is boundless. And once someone tried to connect the incompatible. Squeeze the unimaginable…

People learned to combine various, at first, objects with the help of techno-magical technologies, and then they began to connect living beings.

This is how animal people turned out — centaurs, minotaurs, cynocephals, pegasi, griffins, etc. Co-creators-curators watched. So what? In principle, the Creator did not reject, — it was interesting to observe what this would lead to. And at first everything was fine. We wanted the best, but it turned out, as always.

People let’s experiment and the tower was completely torn off. Absolutely terrible chimeras have gone. All these dragons, but with many heads, man-serpents, man-crocodiles. All sorts of reptiles turned out, and then they got to the insects.

That’s it… And you thought where all these reptilians, insectoids and other indecency come from. The Creator and his team — they created only man. And it turned out okay. But all this rest — these are already people who have tried.

In short, a monstrous imbalance has arisen in knowledge and technology. I had to take immediate action. I had to clean everything up and create a new world, the same as the old one was before all this. This 1000-year-long stage was moved 1000 years ago. We know this period as the “ancient world”. And it’s not ancient at all. Otherwise, how would the buildings have survived for 2000 years? Yes, and European ruin artists captured the ruins of this civilization perfectly. All the old cities of the world are similar in their Victorian style. What about Roman law? How it passed through allegedly 2000 years, and was not lost in the dark ages.

In general, I had to urgently call in “crisis managers” — Satan and his team. Duck, and how many years have they fucked up? A couple of hundred years, that’s for sure. 18—19 centuries — the centuries of the destruction of the old world and the “implantation” of the new. Whole pieces of history had to be pulled out along with the planetary ribbon and transferred. All artifacts of history were thrown into the past. Antarctica was flooded with water and frozen. Cities were covered with soil. This was necessary in order to stop the dome generators operating around the world. The soil was taken here on Earth. The whole Earth is pitted with quarries similar to the Grand Canyon.

They did a great job. Yes, we live in a world created by Satan. So what? Previously, the social structure was based on collectivism, communality, catholicity. And all over the world, the Slavs “kept the maza”! The whole world was under the Slavs! Now individualism is at the forefront. Personal growth, as they say. It’s not bad too. But there is a nuance — individualism gives rise to slavery and exploitation, wars and concentration camps. And it’s all just to satisfy the ambitions of a few people.

All this is very carefully hidden from people. Satan brought the Anglo-Saxons to power and taught them how to create a financial and trading system.

And so we and they will never agree.

And now we have again come to that from which we were torn off. We have already come by the right path, the right and natural way — by the progressive nature of our development.

We will gradually, step by step, remove all the “seals”, reveal all the secrets, look behind the canvas with the “painted hearth” and enter this secret door, whose name is etherodynamics or, in other words, technomagic.

Wand of Hermes. Device. Principle of operation

The Rod of Hermes is a technical device made of matter, but working with an intangible substance, with the building material of matter, with the elements that make up the Space-Time Grid, with that proto-substance that we timidly, but already called ether, with its components, which we call graviton and phonon.

If a lot of people thought about the ether, wrote, talked, talked a lot, and a lot when, then about the forms of its dynamics, about its place in the universe, about the universe itself, about the synergistic structure of man, from society, and even about the beginning of Creation — about it is not enough where and, few people told.

And so, in order to fill this gap, one of the Co-Creators (who called himself O’Jan) sent a teaching called “Kalagiya” to Earth. The teaching came in Russian, which means for the Russians. The Teaching was transmitted in a channel way, through the Prophet. The Prophet Alexander Naumkin accepted the teaching. He now lives in the mountains in Altai.

This teaching is unparalleled in power and informativeness. Personally, I understood only a drop of it, and as a result, I got the book that you are reading. Imagine we understand everything. You can move mountains. In short, study and study for many more years.

I constantly refer to this doctrine — and this is normal, it corresponds to today’s realities and accurately describes and answers the necessary questions posed.

Wands of Hermes, several varieties. But in its classic form it looks like this

Here and now we will consider the Rod, which I call “gravitational” — the Gravitational Rod.

The Rod of Hermes is a technical device that allows you to redistribute the density of the gravitons field in space, thereby changing the direction of the gravitational force in the local area.

At the heart of the principle of operation of the device of the Wand is a phenomenon similar to the phenomenon that we call a gas tornado. This is what a gas tornado looks like:

But the dynamics of gas in the atmosphere and the dynamics of aether are different phenomena, and they are similar only in the first approximation. With a more careful approach, differences appear, which then become more and more significant, and, ultimately, in general, any similarity disappears. Only a resemblance remains.

Therefore, let’s start with how “Kalagiya describes the forms of energy movement. This is written in the 21st chapter of the First Section of the Kalagiya:

“one. It has already been said: “The energy potential will correspond to the degree of its compaction. Condensation of energy is carried out by forcing it into one place, with the application of torque.

3. Rotation has two forms of motion — centripetal and centrifugal.

10. Any viable construction is achieved by the movement of a rotating spiral of energy. Condensation of energy, that is, its injection, is carried out in the same way. In general, any life is built by the movement of a rotating spiral: be it energy or a substance that is composed of energy.

If the centripetal movement of the incoming energy directs the Fire to one place, namely to the Channel of the Movement of Fire, which achieves the discharge of the density of Time and the compaction of Matter (Space) by this Fire, then the centrifugal movement of the incoming energy directs the Fire into radial radiation from the Center of its movement, which achieves the injection of density Time and rarefaction of Matter (Space).

11. Thus, during the centripetal movement of energy, Matter (Space) becomes denser, and the density of Time is discharged in the Center of the Movement of Fire. In the Circle of Influence of Energy in this case the Matter (Space) is discharged, and the density of Time is pumped up; beyond the Circle of Influence of Energy Matter (Space) is condensed, and the density of Time is discharged.

12. During the centrifugal movement of energy, Matter (Space) is discharged, and the density of Time is pumped up in the Center of Fire Movement. In the Circle of Influence of Energy in this case the Matter (Space) is condensed, and the density of Time is discharged; beyond the Circumference of Influence of Energy, Matter (Space) is discharged, and the density of Time is pumped up.”

To obtain anti-gravity effects, the Centrifugal type of rotation of Energy is used. So once again:

“During the centrifugal movement of energy, Matter (Space) is discharged, and the density of Time is pumped up in the Center of Fire Movement. In the Circle of Influence of Energy in this case the Matter (Space) is condensed, and the density of Time is discharged; beyond the Circumference of Influence of Energy, Matter (Space) is discharged, and the density of Time is pumped up.”

Ideally, this formula describes an energy torus consisting of two tori inserted into each other.

In this torus, “Kalagiya distinguishes three zones — the Center of the movement of Fire, the Circle of Energy Influence, and beyond the Circle of Energy influence.

In other words, these are the central channel, the inner torus and the outer torus. This composite torus has charge signs corresponding to the density parameters of the Elements that make up the Space-Time Grid.

In the figure you can see where this torus has pluses, and where are the minuses. Therefore, the central channel and the center itself, the focus, where the energy diverges radially, is charged with a minus. The inner torus, also known as the Circle of Influence of Energy, is charged with a plus. And the outer surface, which is, as it were, a continuation of the central channel, is charged with a minus. We will supply the energy for the launch both to the Central Channel and to the Circle of Energy Influence. The outer surface receives energy from the center.

Why is there a minus, but here is a plus — don’t ask — this is the result of experiments and research.

Now a very important point. Each zone of the energy torus consists of two components — either Space is condensed, and Time is discharged, or Time is condensed, and Space is discharged. And each configuration has its own charge sign.

Space becomes denser, and Time is discharged — this is a plus.

Time is compacted, and Space is discharged — this is a minus.

Then let us clarify that the discharged Time is charged with plus, the condensed Space is charged with plus.

Condensed Time is charged with a minus, Discharged Space is charged with a minus.

We got two pluses and two minuses. Let’s clarify and look at the graphics of the energy tori pattern. To the compacted minus of Time we will add a rarefied minus of Space, and to the compacted plus of Space we will add a rarefied minus of Time.

Gravitons are responsible for Time, and phonons are responsible for Space.

Then, if we condense gravitons, this is a minus. Discharging phonons is also a minus.

And vice versa: we discharge gravitons — this is a plus. We condense phonons — this is also a plus.

And now we come to a very important fact — it turns out that the charge by its nature is not one. There is a graviton charge, and there is a phonon charge.

Then you need to give an approximate formulation of the concept of charge. A charge is a change in the density of the ethereal field in some point local area of the Space in the direction of decreasing or increasing from some initial, “zero” level of this value.

The ethereal field, ether consists of two components, two components of its ethereal substance — gravitons and phonons.

Gravitons and phonons in the first, most primitive definition are energy carriers. Gravitons are carriers of kinetic energy. Phonons are carriers of thermal energy.

Gravitons are responsible for the manifestation of all types of mechanical energy. Including the pressure gradient in the graviton field creates the formation of conditions for such a phenomenon as gravity. Any manifestation of mechanical force can be described as the impact of high-frequency pulses of graviton substance

Graviton is a particle of toroidal shape, filled with energy, which looks like pure Light, like Radiance, like Radiance

The phonon is responsible for the manifestation of all types of thermal energy. All thermodynamics is phonons.

Phonons are filled with energy that looks like Fire and is felt by the senses as a manifestation of a phenomenon called Temperature.

The form of a phonon is the same as that of a graviton — it is a torus, but filled with Fire.

Both the phonon and the graviton can straighten out into the form of a cylindrical spiral, and interacting with each other, provide the manifestation of some other physical phenomena.

For example, from straightened gravitons and phonons, and inserted into each other, the grid of Space-Time is woven, woven.

Or, for example, atoms consist of focused, concentrated phonons and gravitons that form the atomic nucleus and outer shell.

Then the atom can be considered as a corpuscle, as a cavity filled with Fire and Light.

But back to our charges. The charge, as we explained above, manifests itself if the energy density in the ether field increases or decreases locally. But since this field is of a double binary nature, then the charge also has a double binary nature.

In general, it must be said that the whole Universe is based on a binary principle. This is the foundation, this is the pinnacle, this is the quintessence of the entire world order. This is when one whole, without fail, consists and manifests itself in the form of its two components. Two component. Two links. Two halves.

The most remarkable property of binary systems is the manifestation of the Synergy of interaction — this is when each link of the binary system individually does not represent anything special, but when these links are connected, when they interact within the binary system, additional interaction energy is released, called Synergy.

The total energy of synergistic, including binary systems, is always greater than the arithmetic sum of the energies that make up the system, but work, manifesting themselves separately.

And only when the links of the binary system interact, its remarkable property is manifested — to release additional, some kind of internal energy. Where does she come from? Yes, from gravitons and phonons. Their internal energy is huge, but we must learn how to release and use this energy.

And this happens, as a rule, when some of the ether components are compacted — or gravitons, or phonons, or both together. As it is said in “Kalagia”: “… when energy is pumped into one place when a torque is applied.”. And this is nothing but a spiral funnel — a spiral vortex of energy.

So we know that charge can be positive or negative. Now we know that the charge can also have a different nature — both phonon and graviton.

Tribocharge has a graviton nature — the charge obtained by friction. This charge manifests itself when exposed to the atomic shell. Three — we get a charge. We increase the density of gravitons — there will be a minus. And in the place where these gravitons were taken from, their deficiency turned out, the rarefaction of gravitons will be a plus.

The phonon nature has a piezo charge, — the charge received by the action on the atomic nucleus. We put pressure on the piezoelectric element, act on the nucleus of the atom — we get a charge. We extrude phonons onto the surface on one side of the crystal, increase their density in this place — we get a plus in this place. At the opposite end, respectively, there will be a minus. On the one hand, the atom pushes out phonons, but on the opposite side, to restore the energy balance in the nucleus, it draws in these phonons. And this is all the second type of charge.

Now everything seems to be collected to the heap, all the components are there. Now you just need to take these charges and make them move along the trajectories that we showed for the Centrifugal type of energy movement.

The ultimate goal is to solve the problem of pumping gravitons to one point, to a certain focus, so that when these gravitons are compacted, to force these gravitons to release the energy of Light contained within them, which, by its local presence, increases the energy density in this local zone, forming a pressure gradient, pointing outward from the focal point. And then the phenomenon of mechanical expulsion will be observed from the focus point, which can be interpreted as antigravitational repulsion.

And if this phenomenon is formed with the help of a certain generator, then the generator itself will be pushed out from this point. We obtain a solution to the “Baron Munchausen” problem.

Such a generator, if it is properly manufactured, connected to power and used, is the Rod of Hermes.

What do we see? The central trunk, which corresponds to the central channel of the image of the diagram of energy moving centrifugally.

Spiral snakes are elements of the device that form an energy torus, prescribed by Kalagia when describing centrifugally moving energy as a “Circle of Influence of Energy”.

A ball is a structural element that separates the energy flows of the Circle of Influence of Energy and the funnel of the energy flow entering the Central Channel.

Beyond the Circle of Influence of Energy, we do not exert any energy impact — everything happens autonomously, if, of course, everything is done correctly.

Now knowing that the nature of the charge can be of two types, we understand that the power of the elements of the Rod structure must also be carried out from two sources of energy that produce charges of a different nature.

But before that, you need to deal with the question: “What is it — the movement of energy?”

The term “Electric Current” immediately comes to mind. It’s not just a term — it’s an attitude — it’s a wedge driven into our heads. We absorbed this, one might say, with mother’s milk, from the school bench. We don’t doubt it. Nobody doubts.

Ask what an electric current is, and in response, thousands of voices will sing: “Electric current is a flow of charged particles inside a conductor.” In wires, this is a flow of electrons; in liquids and gases, this is a flow of ions. Everything! The beauty!

And just try to respond. They will spread far and wide. They will tear it into a small one, into a vest.

There are no streams of charged particles in conductors in the event of such a phenomenon, which we call electric current — this stream does not exist.

But then the question is: “What is it then? What carries energy? If you stick your fingers into the socket, you will immediately understand — this is energy? What then carries this energy, if these are not charged particles?

The answer is that energy in electrical circuits, with the manifestation of factors that we call electrodynamics, is transferred by longitudinal density waves that arise between atomic bonds in the crystal lattice.

If the substance of the material is capable of forming these waves inside its crystal lattice, we call such a material a conductor.

In liquids and gases — there are real ions, there is a real flow of particles of matter. But we will not touch on this. We are interested in electrodynamics. These longitudinal waves of energy look like this:

What is a wave? Let’s take the course of the school (approximately) … A wave is an ordered process of oscillation of particles forming a wave near the equilibrium position. What can a wave do? A wave, and this is the main thing, can carry energy. And since there is energy transfer, it means that the wave can exert pressure, affecting the energy density of this wave.

Yes, the wave carries energy, but the wave does not carry any particles. Oscillation of these particles “back and forth” near the equilibrium point, this wave forms, but does not transfer anything anywhere. This means that there is no current of particles and cannot be.

In this case, the circuit must be closed. And the phenomena that accompany the wave transfer of energy inside the conductor, which we know as magnetic and electric fields, are also only wave processes, but of a more complex nature and form, about which we still know little. These wave processes can also transfer energy, but these waves do not transfer any substance, some substance.

A longitudinal wave in a conductor, which we perceive as an electric current, propagates along interatomic bonds, interatomic threads formed from gravitons and phonons, opened into longitudinal cylindrical spirals, and lined up “at the back of the head” to each other.

Then, in these longitudinal cylindrical interatomic spirals, somewhat reminiscent of springs, during the formation of a longitudinal wave, zones of densification and rarefaction will form. And this is nothing but a manifestation of charges. Each element of a longitudinal wave, each of its period, formed by compression and rarefaction, has a minimum charge. That is why the energy flow of a longitudinal wave can be identified by us as a flow of charges. And it is right. But this is not a stream of particles, it is only a stream of an energy density wave.

I am telling all this in order to explain that with the help of electrodynamic phenomena, it is impossible to obtain any over-unit phenomena of the manifestation of additional energy.

In order to receive this additional energy, its, this energy, you must first release their ethereal particles, creating the necessary conditions for this. And the most important of these necessary conditions is the densification of the ethereal substance.

But this ethereal substance can be condensed only if this substance is introduced, plunged into a real dynamic process. In our case, we need a process of helical injection, helical dynamic pumping. But in any case, this is a dynamic process, in contrast to the wave processes occurring in electrical circuits.

That’s why we need a generator that could provide this dynamic process — form and support.

For this we will use electrostatic generators.

In general, the term “electrostatic generator” is very deafening. What is electrostatics? This is a branch of the science of physics that studies motionless, static charges. And what do we know here? We know Coulomb’s law, we know a couple of formulas, we know that an electron has the smallest charge, and we know the numerical value of this minimum charge. And that is all!!!

Giant knowledge! We also know the value of the minimum “zero” level of the density of the ethereal substance. This value is a parameter that we call “Electrical Constant”. Did you know it? That’s it… Meanwhile, in English this constant is called “Vacuum Density Constant”. Did you know it? O!

And all this applies only to stationary charges — this is real electrostatics.

About real electrodynamics — about real dynamics, about the real movement of charges, we know nothing. From the word “absolutely”. But it is real electrodynamics that is the door behind which there is a path to unlimited energy.

Meanwhile, before our ancestors knew about it incomparably more. Just knowledge destroyed. Concepts and definitions have been replaced and replaced. Brainwashed with various theories like “Theory of Relativity”. We put on an industrial basis a technique for withdrawing various achievements in this area through the use of patent offices. Organized en masse the work of various committees for the “Combating Pseudoscience” for public and wide condemnation, ridicule, defamation and criticism of both researchers and all sorts of attempts by these researchers to get to this closed knowledge.

You won’t find any information on the net. Everything is in the archives. Something in the libraries.

I found something on the net and was amazed at what scientists were doing at the beginning of the 20th century. Electrostatics is represented by various types of generators, for example. Electrostatic transformers, for example, have nothing in common in design, they have nothing in common with electrical transformers. That’s right, some little things. The question is, why was it necessary?

Nothing… Let’s figure it out… We return to our sheep.

To obtain dynamic processes, which we will call aether dynamics, we need special generators.

We know them. These are electrical generators. These are Tribogenerators. These are piezo generators. There are also nuclear ones, but this is not about us, ordinary people.

Tribostatic generator. This is a Van der Graf generator. mechanical type. Simple. The stationary Brush rubs against the moving conveyor belt, charges are generated and these charges are transferred to the terminal in the form of a metal ball. Variety — pellet generator. In addition, the principle of electrostatic induction is applied.

Piezogenerator. It is mainly used to ignite various types of lighters, to ignite all kinds of burners.

Electrophore generator. This is the most important generator. Overriding. I myself only recently got to the bottom of its true purpose. Although I have been using it for more than one year, the truth has only now been revealed, although it has always been on the surface. We will talk about him.

An electrophore generator, or an electrofork, is an electrical machine designed to multiply a charge, separate it and distribute it to capacitors.

An electric fork, in itself, does not have its own charge, but it can multiply in large quantities and in a short period of time a charge brought from outside.

I remember when I bought it, unpacked it, twisted the handle — damn it, it doesn’t work. Get online and ask. It turned out that you first need to put the initial charge on the disk. Or a comb, or a newspaper between the disks to insert and spin — I did, and the machine started working.

Here is the electric machine. Works, in this case, with a tribocharge. A tribocharge is a graviton charge, where the negative charge is active.

We turn the handle. The generation has gone. How the generation itself takes place on the basis of the law of electrostatic induction, I will not describe the mechanics itself. Explore for yourself.

So, the generation started. What’s happening? Where do gravitons come from? They come from a jar — from a Leiden jar — a condenser. They, these gravitons are pulled out of one jar and transferred to the second jar. On the inner lining of this jar. Accordingly, an excess of gravitons appears on the inner lining, and the bank is negatively charged. In the first jar, from where gravitons are drawn out, the density of gravitons decreases and the jar becomes positively charged. On the outer plates, connected by a metal bridge, there is a flow from the lining of one can to another, and the outer plates are charged with opposite signs. This is necessary to maintain the energy balance — the total energy density in the banks remains at the same level. And we turn the handle.

If we stopped, then we would have two capacitors filled with a charge up to some nominal value. If we want to release the capacitors, drain the charges, we simply bring the spark gap balls together, there is a sharp flow from the area with high pressure to the area of low pressure with the release of a certain amount of Fire and Light, which immediately go into a bound state in the phonon-gravitonic ethereal field.

But we keep turning the knob. The capacitors are overfilled, but generation, due to the specifics of the electroforking device, continues. Where are the gravitons from?

Yes, from space. The arrester balls are far apart, or removed altogether. Then, with the help of one collector, where is plus, gravitons are pulled out of Space. More precisely, from the inter-thread space of the Space-Time Grid. They are pulled out and transferred with the help of a disk to the second collector. And then it is simply thrown out of it, in the same way, into the surrounding Space.

During this period, the graviton flow moves along the conductive elements of both collectors, the pulsation of which, moreover, is smoothed out with the help of receiver-capacitors. From one point of space we take, to another we transfer. The pressure difference that can allegedly be formed is immediately equalized. It’s like taking buckets of water from one corner of the pool and transferring it to another corner, trying to redistribute the density of the liquid in different corners in one pool.

If we attach wires to the ends of the collectors, continuing to turn the knob, a flow of gravitons will flow through these wires from the end of one wire to the end of the other, and the capacitors will smooth out the ripple.

This is how real electrodynamics is obtained — the movement of the flow of charges through the body of the conductor. One end will then have a negative potential sign — it can be injected or compacted from it. The second end will have a positive potential sign. From it we get rarefaction, pulling out charges, reducing the density of the graviton component of the ether.

And since it is this ethereal component that is “responsible” for such a part of the Space-Time Grid as Time, and it is gravitons that are responsible for the same section of information transfer, then in the definitions of “Kalagia” we are talking about such parameters as Density and Rarefaction of Time.

Time is condensed, pumped — minus. Time is being discharged, density is being drawn out — a plus.

We figured out two parameters, but there are two more — Density and Rarefaction of Space. But this is another type of electrostatics — piezoelectrostatics. The piezo charge generator looks like this

One lighter at the end, when pressed, gives out a minus, the second — a plus. At first I just tried to charge the capacitor with these lighters. It turned out that this had to be done “until death”, and then you will not achieve the result. And how will the flow of the piezo charge in the conductor be ensured? And then came the revelation…

I suddenly clearly realized that it is possible to multiply to the required amount, fill the capacitors, and get a positive charge flow in the conductor using the same electric fork. She has no charge of her own. What was given with that and works. But first it must be completely discharged, reset. Which is what I did.

The discharger zeroed the charge of the capacitors. Then he simply shorted all the segments with a disk to each other. That is, each metal segment on one disc short-circuited with a mating segment on the second disc. All segments without exception. And then he added positive and negative piezo charges to the disks in the right place in the right segments. Everything! Then we turn the knob and the reproduction, filling and dynamics of the movement of piezo charges along the conductors began.

In this case, we are working with phonons. With a positive active charge. This component of the ethereal substance is responsible for the formation of the grid of Space, for the atomic nucleus. Filled with fire energy.

At the end of the wire, where the potential for charging the charge is positive, there the Space becomes denser. At the other end, the density of phonons is pulled out, there is rarefaction, there the Space is discharged — there is a minus.

Thus, we have obtained two more parameters of power for ethereal dynamic devices — Density and Rarefaction of Space.

Let’s move on to the Rod of Hermes itself.

In ancient times, such tombstones were laid on the graves of the Russians, who owned magia and techno-magic. The drawing on the slab is nothing but the incoming flow of nourishment to the central channel of the Wand.

Thus, we have a two-component binary power supply system for a techno-magical device similar to the Wand of Hermes. To do this, we use two electrophore generators, each of which works with its own type of charge.

Previously, when these technologies were used without problems, electrophore machines were multi-station. At least two-post, so that there are power outlets of a different nature at once.

Household electrophore generators were in many homes, like Singer sewing machines.

Inside the body of the Wand there are two channels, for two power parameters. These channels are almost straight, slightly twisted to the right.

The snakes are made of a thick conductor so that there is enough space on this conductor for the movement of each of the two streams. Moreover, these streams will go towards each other — one pulls, the second pumps. The same applies to the center channel.

At the ends of the spirals, balls are attached — the heads of snakes. This is necessary in order to twist the incoming charge flows. Now we draw the diagram.

You have to try both options. Feed each coil separately and feed both coils with a combined double potential. We draw connection diagrams.

Now let’s draw a diagram of the fields of the Rod of Hermes.

Let’s compare our scheme with the scheme from “Kalagiya”.

Everything matches.

Now the question “Why wings”? This is for control and stop. The wings are most likely made of glass. A plus is generated from friction on the glass. The wings are connected to the head. The head is in contact with the channels of the central body. The center channel is powered by a minus. Three wings or one wing — plus is fed into the Central Channel. The center channel stops or slows down. The “Beyond the circle” zone connected with the central channel also slows down or stops.

The launched Rod pumps gravitons into focus, into the Center point. This is where the compaction takes place. But the most remarkable thing is that the Rod begins to pull an excess amount of gravitons from Space into the Central Channel, which are concentrated in the focus of the Rod. An excess of gravitons forms a local zone of excess pressure in this place, which manifests itself in the form of repulsion, pushing objects placed there out of this zone. We observe the phenomenon of gravitational repulsion.

And this is only one kind of techno-magical device called the Rod of Hermes.

Electricity and heat from the ether

Our ancestors did not know electrodynamics, and therefore the mechanical drive of mechanisms was carried out through heating water and producing steam with the operation of steam engines. But even in that short period of time when both concepts, both etherodynamic and electrodynamic, existed in parallel for some time, even then the power generators were driven to generate electricity through heating water and producing steam. Just as it is now done in thermal power plants. Of course, there was also hydrogenation, but nevertheless, obtaining electricity was always associated with turning the electric generator.

This is because it was not an easy task to take and convert an etheric dynamic beam at once, directly into an electric current. More precisely, I would say that this is a simple task, but our ancestors simply did not have time to do it. There were big changes, and the etheric energy was destroyed.

Of course, anti-gravity, replication, materialization, teleportation, etc. are all very cool. But how, after all, would you like to fly to the taiga (well, or to the dacha), build a house, or just at least put up a tent, stick an ether generator into the ground, connect a converter to it and get 220 (380) volts 50 Hz in the network in the amount of power that you need, without any problems? restrictions.

The solution to this problem is very eloquently shown here in this very famous video. If you haven’t seen it, take a good look, and if you have, refresh all the details in your memory.

https/www.youtube.com/watch?v=i19Sm9gUJ9s

And here is the diagram itself

What do we see? First of all, high-voltage power lines. This transmission line saturates the space with high potentials, or in other words saturates the space with electrostatics. Gravitons and phonons. Where do these essential components go? Naturally to the Ground. And if there is a conductor, then an electric charge is induced on it, which flows into the Ground. If we make a small gap in the conductor, then a discharge will occur in this gap and the arc will burn. This is because gravitons are accumulating at one end of the gap, and there is a void at the other-everyone has escaped into the ground. A critical pressure difference occurs, with an explosive transition of gravitons through the gap, and with the release of light trapped in gravitons.

And what is interesting is that at this point of rupture, at the place of arc formation, an electric current occurs. But it’s not DC. This current is pulsing. To be absolutely precise, this is a pulsing unidirectional current of high frequency. This is actually an alternating current, but with no reverse current branch. A remarkable property of this current is that this current is also variable. This means that this type of current has the ability to transform.

That is, what happens. Before the spark gap (before the candle), we have an ether flow in the circuit, but in the spark gap and in the circuit after the spark gap, an electric current flows into the Ground.

This current can and should be converted. This is done using a transformer. The fact is that the electric current after the discharger has a very high voltage and a very small current. We need to use a step-down transformer to lower the voltage to normal household values and raise the current. Next, we rectify the current using a diode, since the field is specifically variable under the power line. You can also add a capacitor and smooth it out with a capacitor. And then we feed it to the phone for charging.

At the same time, the power after transformation-it will remain unchanged. And it is enough just to charge the phone. Well, or one LED flashlight.

Not enough… however… We need at least domestic and industrial volumes.

That is why instead of a power line, we will use an ethereal generator like the Wand of Hermes.

I do not yet know what type of generator should be used — centripetal, centrifugal, or Vajra in general. That is why this section is not a discussion of the issue, but a reflection. The truth will be obtained through experiments.

The generator directs the beam to the spark gap.

The mating part of the spark gap is connected to the Ground, but through a transformer. After the transformer, there is a rectifier, a controller and then a conventional industrial inverter, since, due to the development of alternative energy, they have made a whole line of products with a set of various capacities and parameters.

Next, we configure all this “music” to the desired parameters and use it. The gap in the spark gap and the very intensity of the feed in the head of the Rod are subject to settings.

Rod, unlike power lines, it collects gravitons in the form of a vortex funnel, and twisting them into a bundle directs them to the first half of the spark gap. The second half is connected to the transformer, and through it to the Ground. If the first half is negatively charged, then a positive charge is induced on the second half. Depending on the gap size in the spark gap, the breakdown voltage with a burning discharge arc is set. A positive charge cannot escape into the Ground — it is held by the negative charge of the first half. There is only one thing left — a breakdown and an arc.

But the problem is that a graviton discharge is a pure electric current voltage. Hundreds of kilovolts, and the current is near zero. Therefore, the power will also be near-zero. Useless. Well, maybe for lighting purposes. What to do?

We need to somehow add the second component-Fire, the basis of the current strength. And the carrier substance of Fire is phonons. That’s why I suggested that the carrier generator might be a Vajra. I don’t know yet how to organize a discharge in such a situation, but I think that this issue will be quite easy to solve. After all, our ancestors received heat to warm water without any problems.

Let’s use our theoretical framework and construct a different type of Baton. So far, only theoretically. Now I will explain why only theoretically.

We take the Baton. But the spiral snakes are twisted to the right. In the Rod discussed earlier, the spirals are coiled to the left, and the center channel is twisted slightly to the right. Here, the opposite is true.

Let’s go from the opposite. If the winding of the spirals is right, then this means that this Circle of Influence is connected to minus. That is, the graviton flow, passing through the turbulator (snake’s head), twists to the right at the output.

The central channel, respectively, is connected to the plus and twisted to the left.

The scheme turns out like this

This type of Wand also uses a centrifugal type of energy movement. But only the food signs are reversed. Then the scheme of fields of rotating energy tori will look like this

And what we see in the drawing of the newly constructed Rod. We see that phonons are concentrated at the point of focus. That is, heat is concentrated at the point of focus. This is where our ancestors got their heat to heat water for their steam engines. Fuel-free fireplaces also worked.

But this type of Wand may have another fundamental function — generating electricity from the etheric field directly directly with the parameters of industrial power. But this is what our ancestors did not know.

See the section “Etherodynamics and electrodynamics”. I’ll show you such a generator there. This generator is useless, as it only outputs voltage. The current is almost zero and the power is zero, respectively.

But if we apply our newly constructed Rod according to the same scheme, then the possibility of obtaining an electric current of industrial power becomes obvious

Here’s the thing. When the Wand is focused into focus, either phonons or gravitons are concentrated at this point. And these are particles filled with energy. Either it’s Fire or it’s Light. When you concentrate in focus, this energy is released.

We use light for the purposes of anti-gravity, teleportation, communication and many other things that we will come up with.

We use fire to generate heat, electricity, heat rays, and anything else we can think of.

I’m just going to jump ahead a bit and say that the centripetal type of generator allows you to get these channel, beam formations.

Well, something like that. The theory has started working…

MERCURY. VAJRA. NEW EDITION

It’s spring outside. And everything happens as I expected. Letters to the Ministry of Defense of the Russian Federation do not give anything. Everything is ignored. Now from the word “generally”. At first, at least something was answered, now they are completely ignored. This, in general, is not surprising if we analyze all the information on the topic of how our General Staff conducts the NMD.

We continue on our own.

I have tried running the Rod with two generators. Does not work. The electrophore generator does not want to work with piezoelectric charges. It seemed to me that there is no difference with what type of charge an electrophore generator works with. It turned out that it seemed in vain. There is a difference. Even if the capacitors reverse polarity, this is not because a piezo charge accumulates in the bank. No… the piezocharge drags the Tribocharge along with it. It is he who begins to multiply by electrophoresis and accumulate in capacitors.

And what to do? There are no options left (at least for now) but to develop the topic of mercury use. I don’t see any other options yet.

Let’s remember what unique qualities of mercury we know.

Mercury is a liquid metal at room temperature. Becomes hard at -39°C. If you freeze two mercury cubes in a mold, remove the cubes from the molds, and then touch these cubes with their faces, the faces merge instantly. That is, diffusion occurs instantaneously.

Frozen mercury does not deform. At all. The hardness is the highest.

Why might this be. I put forward a version that mercury has no protons in the nucleus. Only neutrons. The orientation of electrons in the electron shell is also different from the orientation in the atoms of other materials. The electric fields of electrons are not oriented radially, from the center outward, but somehow along the circles of the orbitals. Therefore, instantaneous diffusion occurs. There are no protons in the nuclei – there is nothing to repel, and electrons do not repel with their fields. There is an instant overlap of the shells. The crystal lattice is also not formed. During critical cooling to the point of “freezing” (-39 degrees C), the neutron shells themselves, the neutrons themselves, overlap. It turns out a single, very solid monolith. Hard but brittle.

This is the version… But it is this version that will explain the unique electrostatic properties of mercury.

What is a neutron. This is an “empty particle”. If the proton is filled with Fire, read as phonons, if the electron is filled with Light, read as gravitons, then the neutron is not filled with anything. It is “empty”. And in this state, the neutron can exist for a long time, but only as part of the atomic nucleus. In the free state, the neutron quite quickly, after 11 minutes, decays into a proton and an electron. That is, in a free state, such a configuration is unnatural. There shouldn’t be a void. And this emptiness is filled with Fire and Light – forming two particles, a proton and an electron.

This means that it can be assumed that mercury, under certain conditions, can interact very actively with both phonons and gravitons. Well, about gravitons – this still needs to be thought about, but with phonons – this is almost certain.

What does it mean to interact? Either it is easy to be filled with Fiery phonons, or to pump these phonons through oneself, if one sets a certain pressure difference in any volume of mercury.

Apparently, this is the basis for the property of mercury to turn into gold when filling the required amount of neutrons with phonons and turning them into protons. And the electrons during such a transformation should themselves orient themselves radially with their field in relation to the positive nucleus.

But we are interested in the property of mercury to pump Fire phonons through its volume.

The unique quality of mercury is based on this property, which is necessary for the manufacture and launch of various techno-magical devices.

I have already touched briefly on this property of mercury in the Dome Generator section. As the internal pressure increases, mercury begins to absorb external phonons into itself. Neutrons begin to fill with Fire. If an internal pressure difference is created in a certain volume of mercury, then phonons begin to flow inside from the region of increased pressure to the region of reduced pressure, thereby creating in this volume of mercury on its surface a region of accumulation of phonons and a region of rarefaction of phonons. A positive and negative electrostatic charge of a piezoelectric nature is created.

To get all this, you need to place a certain volume of mercury in a closed cavity and “press” this volume well. Mercury will be filled with phonons.

Now, if we want to get a difference in static potentials, we need to create a pressure difference.

Let’s assume that we have made a cavity. Made from iron. Iron, unlike other metals, does not dissolve in mercury. So that’s iron. The path of the cavity will be cylindrical. Solid screw plugs on both sides. We twist one cork. Pour mercury. Almost to the top. We twist the second cork. We twist until it stops, so that the cork becomes, as it were, a stock. We twist it all the way to create increased pressure inside the mercury.

Created. The mercury was filled with phonons. Now there are options. It is possible, for example, to apply a difference of electrostatic potentials of a piezoelectric nature to the ends. Let’s apply, for example, to the ends. Inside, there will be a pressure difference and an etherodynamic current. Phonon current of fiery nature.

Most likely this current, through space, will close on itself. According to the type of magnetic field around the coil with current.

To increase this current, for example, one end of the cylinder can be heated. At this end, the pressure in the mercury will increase. The current will increase.

At the end where the phonons come, there will, of course, be a plus. If this end touches, for example, the spiral of a gravitational rod, then an etherodynamic current of a piezoelectric nature will flow along such a spiral. Which is what we need.

But we have two snakes. Then on the cylinder we make a minus in the middle, and pluses at both ends. Then, with such a cylinder, both spirals of the Wand can be launched at once. And heating is carried out in the middle of the cylinder. For example, just take it in the middle in your hand. From the warmth of the hand, the pressure in the middle will increase and the ethereal current will flow from the middle to both ends. This technology used to be called “pharaoh’s cylinders”.

Now let’s look at such a device, which our ancestors called “Vajra”. It was considered the weapon of the gods, which could throw lightning.

Here are items stylized as Vajra. India is full of them. Which means it was all very recent.

.

And now we look at the drawing from Kalagia. This is the very first figure from the application table. In the explanation to the picture, it is written that this is nothing but the first method of crystallization of Shunya.

That is, in such a way, in such a configuration, it is possible to concentrate the ethereal substance, which must be stable. For example, in the atom.

But we are interested in this form of crystallization, from the point of view of its application to the construction of the Vajra.

In some sources, this form is called merkaba

But the use of a tetrahedral or trihedral shape is done for convenience. In reality, these are all cylindrical or conical ethereal vortices and their possible combinations.

And now let’s “fasten” the field scheme shown in the figure from Kalagia to this picture.

.

And now we look at the Vajra and “fasten” the scheme of fields to the Vajra.

What is missing? Not enough mercury. And where should she be? The stump is clear – here:

Everything seems to be clear. Let’s do it. All spare parts are taken from the hardware store.

Why did I show it in such detail? Although this is a model, the manufacturing and assembly technology is approximately correct. The only difference is that in the middle there is a more rational shape in the form of a ball. And the arcs, of course, are not attached by soldering, and are not made of wire.

How Vajra works. First, we collect half. Then, using the second threaded rod-axis, we set the excess pressure inside. We counter the second half. With the help of a piezo generator (made of piezo lighters), we set the initial, closed on itself, flow of phonons inside.

We heat the central part. Mercury absorbs additional portions of phonons from space. This occurs before the phonon flux reaches a certain critical density level.

When this level is reached, the flows no longer close to themselves, and the circumferential incoming phonon flow is concentrated in the center and exits in the form of two beams in both directions.

In order for the beam to exit only on one side, some design improvements need to be made. I don’t know this yet.

The current coming out of the vajra is very similar to a laser beam. Only the energy filling of the laser with Light is very low, and in order to increase the beam power to acceptable values, you need to carry a power plant with you for pumping. In the case of the Vajra, the ray is filled with Fire, which is released in a dense ray. Energy supply is the highest. Our ancestors used this as a versatile cutting tool.

For example, as a stone cutter. Here are the Hindu temples. How is it done and how is it done? Now you know. Hand-sized mini-Vajras, like the ones in my pictures.

In order not to carry an electrophore generator with them to obtain a graviton ether flow, our ancestors used electrets. These are devices capable of accumulating an electrostatic charge. A type of permanent magnet with a magnetic field.

Electrets were made from a mixture of ozocerite and rosin. 30% ozokerite and 70% rosin. Ozokerite is a mountain wax – a special black hydrocarbon similar to paraffin with the smell of kerosene. A melt of ozocerite and rosin is made on the stove in a form the size of a hockey puck. Then an electrostatic potential is applied to this washer, for example, from an electric fork. And in such a molten form, the material must cool completely (we apply the potential until it cools down). We take out the electret from the mold. Ready.

And also, if you remember, the Rod of Hermes has a ball at the end. If there is mercury, we heat it, we get a positive flow for spiral snakes. The negative flow through the central channel is obtained by touching the electret. All.

Now the Vajra model needs to be filled with mercury (you can see the dates on the pictures, I haven’t had time yet), assemble it, run it and be very careful… Are you interested? I’m interested too. Very interesting.

Supplement (03/14/2023)

Twisted in my head the topic of how to make the energy beam coming out of the Vajra go out only on one side. Everyone understands why this is necessary. If the beam comes out on two sides, there is a danger of “slashing” itself. And why then Vajra with the release of energy on two sides.

Firstly. it’s a classic. Secondly, if such a vajra is put on an axis, then by rotating it, we get something like a circular saw. Moreover, you can put a double cruciform Vajra on the axis. Then you will definitely get a very effective saw. You can cut megaliths.

For greater convenience, of course, you need a vajra with access to one side. The issue was resolved fairly quickly.

I found the solution in numerous images of the same items stylized as Vajra.

We perceive it as a bell. But there is a nuance here. And why does the bell have such a complex handle, stylized as a Vajra?